FLB-390 Air Launched Antenna

The FLB-390 is a feed loaded bowtie antenna specifically designed to be used in areas where ground coupled antennas are difficult or impossible to use. The steady signal and high directivity of this antenna makes it an excellent choice for layer detection and cavities. This antenna is your choice No. 1 when you need to do a survey in a very rough terrain or when the speed of the survey is paramount.

GCB-100 Ground Coupled Antenna

The ground coupled bowtied antenna GCB-100 is a shielded small form factor ground penetrating antenna for geotechnical and environmental applications when deep penetration is necessary. The antenna is fully shielded and the front to back ratio is very high making it an ideal choice for noisy environments. This antenna is fully compatible with all Geoscanners ground penetrating systems as well as with all SIR® control units from GSSI. The antenna is delivered with a sled for towing it while doing the survey in the field. The fastening points allow to use this antenna with all the Geoscanners accessories without any further modifications.

GCB-200 Ground Coupled Antenna

The ground coupled bowtied antenna GCB-200 is a light weighted, small size ground penetrating antenna for geotechnical and environmental applications. The antenna is fully shielded and the front to back ratio is very high making it an ideal choice for noisy environments. This antenna is fully compatible with all Geoscanners ground penetrating systems as well as with all SIR® control units from GSSI. The fastening points are standard for all Geoscanners products making it possible to use the same accessories in several antennas providing a great deal of integration in larger systems.

GCB-300 Ground Coupled Antenna

This antenna is the compromise between the high resolution of the GCB-400 and the deep penetration of the GCB-200. It will give the best of both worlds with small sacrifices to it. This is the perfect choice for companies that don't have the opportunity to make a big initial investment, but still have a wide variety of jobs to do. In many cases this antenna will suffice for all your applications in utility detection surveys. As with all other antennas manufactured by Geoscanners AB this antenna is fully compatible with all GSSI control units.

GCB-400 Ground Coupled Antenna

The ground coupled bowtie antenna GCB-400 is a light weighted, small size ground penetrating antenna for utility detection and shallow investigations surveys. The antenna is fully shielded and the very high front to back ratio makes it a very robust choice for noisy urban environments. This antenna is fully compatible with all Geoscanners ground penetrating radar systems as well as with all SIR® control units from GSSI. The fastening points are standard for all Geoscanners products allowing for a great deal of integration into existing systems or to create ones from the ground up.

GCB-500 Ground Coupled Antenna

The ground coupled bowtie antenna GCB-500 is a light weighted, small size ground penetrating antenna for utility detection and shallow investigations surveys. The antenna is fully shielded and the very high front to back ratio makes it a very robust choice for noisy urban environments. This antenna is fully compatible with all Geoscanners ground penetrating radar systems as well as with all SIR® control units from GSSI. The fastening points are standard for all Geoscanners products allowing for a great deal of integration into existing systems or to create ones from the ground up.

GCB-1000 Ground Coupled Antenna

This antenna is the first antenna in the series of Geoscanners AB microwaves frequency antennas. The purpose of this antenna is to be able to define small structures in concrete at shallow depths without compromising the penetration of it. It is possible to do rebars mapping, central heating pipes mapping, ice thickness in winter roads, as well as asphalt thickness measurements in surveys where the antenna can be in contact with the road. Usually a better penetration is achieved than the one with horn antennas.

HA1000 Horn Antenna

Horn antennas are used in many applications, from pavement thickness and road condition assessment to high speed tunnel surveys. The main property of these antennas is that they are very focused and have low ringing in the upper part of the range where it matters for the intended applications. Our HA1000 has been extensively used for road surveys and recently also for assessment of primary and secondary lining in tunnels.

HA2000 Horn Antenna

The HA2000 GPR horn antenna has all the properties of the HA1000, but it has a double the center frequency. This means that thinner layers of asphalt in road investigations can be isolated easily. This antenna is equipped with very sensitive electronics and the weak signal is further amplified with a very low noise amplifier to obtain access to even the faintest of the reflections.

BA100 Borehole Antenna

The BA100 is a GPR borehole antenna for applications requiring access to the features via a nearby borehole. This antenna is one of the few models available on the market for GSSI ground penetrating radars. The cleaner signal and higher penetration than the competition makes it an ideal complement for companies surveys marble quarries, salt mines or any other application requiring borehole antennas with mid frequency operating bandwidth.

BA500 Borehole Antenna

The BA500 is a GPR borehole antenna for applications requiring access to the features via a nearby borehole. This antenna is one of the few models available on the market for GSSI ground penetrating radars. The cleaner signal and higher penetration than the competition makes it an ideal complement for companies surveys marble quarries, salt mines or any other application requiring borehole antennas with mid frequency operating bandwidth.

BA1000 Borehole Antenna

The BA1000 is a GPR borehole antenna for applications requiring access to the features via a nearby borehole. This antenna is one of the few models available on the market for GSSI ground penetrating radars. The cleaner signal and higher penetration than the competition makes it an ideal complement for companies surveys marble quarries, salt mines or any other application requiring borehole antennas with mid frequency operating bandwidth.

MFA1250 – Variable Multifrequency Antenna

It is a true variable antenna with just the addition of elements of the antenna, the frequency is changed, but the electronics remains the same.

Electronics: TR501 (transceiver configuration), RX501 + VHT501 (bistatic configuration)